Equipment and vehicles
Add your gear, get it issued and inspected, ask for replacements, filter and report on the register, and keep the vehicle fleet's compliance dates.
On this pageBefore you start
Equipment is your company's gear register: everything from harnesses to power tools, who holds it, and when it's next due for inspection. Vehicles are a separate, simpler fleet register. Everyone can add their own gear and ask for more; the office issues gear, records inspections and manages the fleet.
Before you start
Your plan needs Field registers turned on. What you see under Equipment depends on your role: everyone gets a tab for their own gear (labelled My equipment, or Mine if you also see the whole register) and Issued to me; the owner, admins, dispatchers, office and site supervisors also get Register, the whole company's gear.
Add gear to your kit
- Open Equipment and select Add item.
- Choose the item's Type. If none is listed, ask the owner or an admin to add one under Settings → Equipment first.
- Enter what you know: brand, model, serial or batch number, and the dates it was manufactured and put into service.
- Choose whether it's Company or Personal gear. You have to choose one before the item will save.
- Add a photo of the item and, if it has one, a photo of its label or serial number.
- Select Add item. The new item opens in a side panel, which is a bottom sheet on a phone.
Your own gear appears under that tab. You can flag it damaged or remove it from your kit at any time; the office handles everything else about it.
- Flag damaged puts the item into quarantine straight away. Describe what's wrong, and add a photo if you can. Don't use it again until the office clears it.
- Remove from my kit takes it off your list without deleting anything. Choose a Reason: Lost, Damaged, Worn out, Returned to office or Sold or personal. You can add a note.
Issuing and returning gear to service
The owner, admins, dispatchers and office issue gear and decide when quarantined or retired gear goes back into use:
- Issue gear, from the Equipment page, adds a new item and hands it to someone by name in one step. Issue to on an existing item's record hands it over; if it already has a holder, the button reads Reassign.
- Return to service brings quarantined gear back, once it's been checked and is safe. It isn't offered while an inspection is still owed (see below).
- Retire and Reinstate take gear out of, and back into, the active register.
Quarantine takes gear belonging to someone else out of use, with a reason. Site supervisors can do this too, alongside the owner, admins, dispatchers and office.
The owner, admins, dispatchers, office and site supervisors can also check gear out to someone and back in, separately from who holds it: useful for a shared tool that lives in the store between jobs.
Inspections and automatic quarantine
Gear can carry an inspection interval and a lifespan, set on its type or overridden on the item itself. The owner, admins, dispatchers and office select Record inspection on an item and can record any kind: Pre-use check, Interim check, Detailed inspection or Certification. A site supervisor selects Record a check and can record a pre-use or interim check on gear that isn't theirs, but not a detailed inspection or certification.
Only a Detailed inspection or a Certification moves the due dates forward, and only when it passes. A Pre-use check or Interim check is recorded but never moves a date. A failed inspection quarantines the gear immediately.
If a gear type is set to Quarantine automatically when overdue, ONYX1 takes overdue gear out of use itself overnight, for a missed inspection or a passed retire-by date. Gear quarantined this way needs a passing detailed inspection or certification, recorded after the quarantine, before it can go back into service. Gear past its retire-by date can't go back into service at all: it needs replacing.
Reminders about gear due for inspection or nearing its retire-by date go out to the holder and to the office as they fall due, and again once they're overdue.
Ask for gear
Anyone can ask the office for gear they need:
- Select Request gear on the Equipment page, or on Equipment → Requests. The form opens in a side panel on desktop or a bottom sheet on a phone. Under What do you need? choose the type, then say Why? and how urgent it is: Low, Normal or High. If it replaces something in your own kit, pick that item under What does it replace?. Add a note or photo if it helps, then select Send request.
- The owner (and admins, if the owner has switched that on) approves or declines the request. Once approved, the office marks it ordered and ready for pick up as it moves along, then issues it to you.
- Track your requests under Equipment → Requests, where selecting a row opens its detail panel, with Open full request for the full page. They also appear alongside other approvals in Approvals.
Filter the register
The register starts with a search field and groups gear by holder. Search for a name such as Pablo or for Office, Yard or In store, or select a group. Each person and location group shows a count. Selecting a group shows its gear below; a search that matches one holder opens that holder's gear directly.
Gear without a holder is grouped by storage location: Office, Yard or In store. New unassigned gear starts in In store. The owner, admins, dispatchers, office and site supervisors can choose a location when adding or editing gear without a holder. When someone returns their own gear to the office, it moves to the Office group.
Choose Type, Status, Due or Ownership to update the groups and selected gear immediately. On a phone, the Status shortcuts (All, In use or quarantined, Quarantined and Retired) sit above the list, and the Filter button opens the other choices. Select Clear on desktop or Clear filters on a phone to remove these filters.
The register shows 25 items at a time, with Previous and Next underneath. The tiles above it (Items, Needs attention and Quarantined, of which a phone shows the first two) always count everything you can see, whatever the filters show.
Open an item
Select an item in the register to open its record in a side panel, which is a bottom sheet on a phone. It shows the item's status and any inspection warning, then the actions you can take: Quarantine, Retire, Issue to or Reassign, Record inspection, Edit, and Check out or Check in. Below those are who holds it, when it was last inspected and when it's next due, photos and documents, and the inspections on file. The owner, admins, dispatchers and office also see its cost and supplier and its history.
Close the panel to go back to the same page of the same filtered list. In Mine, selecting a card opens the item on its own page instead.
Reports
The owner, admins, dispatchers and office select Reports on the Equipment page to open six reports: Issued per person, Spend, Due in the next 30 days, Overdue or expired, Quarantined, and Company-owned and unassigned. Site supervisors, techs and contractors can't open reports, though site supervisors still see and manage the register itself. Spend, which totals what gear cost by person, item type and month, needs the same access to cost figures as the rest of ONYX1, so it's offered to the same people who can open reports at all.
Download the register or a report
The owner and admins can Download CSV and Download PDF of the filtered register or any report; the selected person's or location's gear and the other active filters apply to both files. Nobody else sees these buttons. A small file downloads straight away; a large one is built in the background and appears under Settings → Exports. A PDF is limited to 2,000 rows: past that, download the CSV instead.
Vehicles
The vehicle fleet is a simpler register: name, plate, WOF, registration, service and insurance dates, and who's driving. The owner, admins, dispatchers, office and site supervisors manage it under Vehicles. A driver sees only their own assigned vehicle, under My vehicle, with themselves shown as You.
To add a vehicle, select Add vehicle, fill in what you know and select Save. Select a vehicle in the list to open its record in a side panel, where you can:
- Select Edit to change its details and dates.
- Change its status to Available, Under maintenance, Out of service or Retired.
- Choose a driver for an available vehicle and select Assign. Assigning a driver puts the vehicle in use.
- Select Return, for a vehicle in use, to clear the driver and make it available again.
A WOF, registration, service or insurance date that has passed turns amber, and the vehicle gets a Compliance due label. For standalone vehicle inspections, see Checks.
Each night ONYX1 checks these dates. Once one is within two weeks, or has passed, it adds one reminder to Notifications, for the vehicle's driver or, with no driver, for one admin (a dispatcher or office user if there's no admin). It doesn't add a second when the date passes. For the owner, admins, dispatchers and office, the date also shows under Coming due on Home from 30 days out, and stays there while it's overdue.
A vehicle set to Retired gets neither, so retire a vehicle you no longer use to stop its reminders. Its dates stay on its record, and Vehicles still shows a passed date in amber with Compliance due. A reminder already sent isn't removed from Notifications. Set the vehicle back to another status and its dates count again.
Settings: item types and who approves requests
Under Settings → Equipment, the owner and admins set up the item types crews choose from when adding gear, including each type's inspection interval, lifespan, reminder lead time and whether it quarantines automatically. The same page has a switch for whether admins, as well as the owner, may approve gear requests.
If something goes wrong
- There are no item types yet. An owner or admin adds them in Settings, under Equipment. Gear can't be requested until at least one type exists. The Add item panel says the same thing in other words: There are no active item types yet. Add one in equipment settings first.
- This gear was quarantined automatically. Record a passing detailed or certification inspection to return it to service. A plain Return to service isn't offered until that inspection is on file.
- This gear is past its retire-by date and cannot go back into service. Replace it instead.
