Skip to content

Investigate and sign off incidents

Fill in one investigation report for an incident, have the owner or an admin sign it off once, and let the incident close itself when the last action is done.

For owners and office staffLast reviewed
On this pageBefore you start

Every reported incident gets one investigation report. The investigator fills it in and signs it in one go, the owner or an admin signs it off once, and the incident closes itself when its last corrective action is done. The report follows the sections of the incident investigation form most NZ trades already use.

Before you start

  • Investigate: the owner, admins and site supervisors.
  • Sign off or decline: the owner and admins. Nobody signs off an investigation they signed as the investigator, except the owner. If an admin investigated, the owner or another admin signs it off.
  • See the person involved and their injury: the owner, admins and site supervisors only. This is health information. Dispatchers, office staff, people with access to the incident register, and the person who reported the incident see the incident without it.
  • Tick an action done: the person responsible for it, or anyone who can investigate.

How an incident moves

  • Open: reported, and the investigation is not yet submitted or was declined. The investigator acts next.
  • Waiting for sign-off: the investigator signed and submitted the report. The owner or an admin acts next.
  • Signed off: signed for the business, with corrective actions still open. The people responsible for the actions act next.
  • Closed: every action is done. A closed incident cannot be changed or reopened.

Fill in the investigation

  1. Open Incidents and select the incident. The record opens in a drawer on a wide screen, or a full-screen sheet on a phone.
  2. Work through the numbered parts. They are numbered 1, 2, 3 and so on, and when Person involved does not apply, the next part takes its number. Fields you must fill in are marked Required, and most others Optional.
    • Job details: the job, what the report relates to, its severity, and the investigation start and end dates. Both dates start at today.
    • Person involved, for an injury or illness only: choose a team member, or Someone not on the team and type their name. For an injury, tick the type of injury and choose the injury severity. Choose the response (first aid, medical attention, emergency services) and the outcome.
    • What happened: the reporter's own words. For a near miss you can also choose its severity.
    • Corrective action: select Add an action for each fix, with a control level, who will do it and when. If no action is needed, say why.
    • WorkSafe notifiable: Yes or No. If Yes, you can say whether WorkSafe was notified.
    • Toolbox meeting held: Yes or No. This is optional and holds nothing up. It is only an answer on the report: to record the talk itself, use Record a toolbox talk (see Toolbox talks below).
    • Sign-off: you sign as yourself, with the name on your ONYX1 account.
  3. Everything else from the incident investigation form is under More detail (optional): the hazard from your hazard library, the contributing and primary causes, the person's address, phone number, length of employment and age, the damage details, and additional notes. Nothing there is needed to submit or sign off. Whatever you fill in prints on the PDF. Keep the person's injury and health details in Person involved: the causes, the damage details, the actions and the notes are seen by everyone who can see the register.
  4. Select Save draft to come back to it later, or select Sign and submit.

If something required is missing when you select Sign and submit, the form lists what is missing at the top, shows the message under each field, and moves you to the first one. ONYX1 also checks the report when it arrives: the investigation dates, at least one action or the reason none is needed, and the person involved and their injury for an injury or illness. The owner and admins get a notification that the report is ready to sign off.

After you submit, the report is locked, and its evidence photos can no longer be removed. It only opens for changes again if it is declined.

Sign off or decline

  1. Open the incident. Its status is Waiting for sign-off.
  2. Read the report.
  3. To sign off, check Signed for the employer: you sign as yourself. If an employee signed the report too, choose them under Employee who signed and check Date they signed, which starts at today. Leave it at No employee signature if nobody else signed. Then select Sign off.
  4. To send it back, write what needs to change under Reason for declining and select Decline. A reason is required.

A declined report goes back to the investigator as Open, with your reason shown on the incident and in their notification. They change it and submit it again.

If no corrective action is open when you sign off, the incident closes straight away. Otherwise each person responsible for an action gets a notification, and the incident is Signed off until the actions are done.

Finish the actions

The person responsible for an action, or anyone who can investigate, selects Mark done when it is finished. ONYX1 records who did it and when. An action that is still open after its due date sends its person an overdue reminder, and the incident shows Overdue in the register. An action marked done stays on the report: it cannot be changed or removed.

When the last action is marked done, the incident closes by itself and the owner and admins get a notification. Nobody needs to close it.

Toolbox talks

A toolbox talk is optional. To record one, select Record a toolbox talk on the incident and enter the date, who ran it, who attended and what was discussed. A talk does not change the incident's status.

Download the report

Select Download PDF on the incident for the investigation report on your company letterhead, in the order of the incident investigation form, with the sign-off. It also prints anything filled in under More detail (optional), and for incidents investigated before the form was simplified, everything that was recorded then. It includes the person involved and their injury, so only the owner, admins and site supervisors can download it.

Export the register

From the full Incidents register, use Export. Choose optional From and To dates and Notifiable only, then PDF or CSV. The register shows each incident's status, causes, corrective actions, investigator and sign-off. It never includes the investigation's details of the person involved or their injury, but the description is the report as it was written, including any first-aid notes. Technicians and contractors without access to the incident register cannot export, and the button is hidden for them.

Records of notifiable events are kept for at least 5 years under the Health and Safety at Work Act 2015, section 57.

Incidents from before this change

Incidents that were part way through the old review steps are back at Open, with their root cause copied into the primary causes and their actions kept. They need one investigation report and one sign-off. Incidents that were already closed stay closed.