Security settings
Require two-factor sign-in, set sign-off, safety, photo and clock-in rules, and choose whether the client portal shows job photos and progress.
On this pageBefore you start
Settings → Security holds your own password and the rules that apply to everyone in your workspace: two-factor sign-in, customer sign-off, the pre-work safety checks, photo flagging and sharing, clock-in location, whether crew see the time left on a job, and whether customers see job progress in the client portal.
Before you start
- Only the owner and admins can open Settings → Security. Both can change every rule on this page except Owner approves safety documents before a job is scheduled, which only an owner can change.
- Most switches have a separate Save policy or Save button underneath. Changing a switch alone does not save it. ONYX1 shows Saved. after a successful change.
Change a rule
- Open Settings → Security.
- Turn the switch for the rule on or off.
- Select Save policy or Save under that switch.
Every change is recorded in the audit log with who made it.
Your password and two-factor
Your password is the same form everyone has on My account. The line under it shows Two-factor: enabled or not enabled. If it isn't enabled, select Set up 2FA. Your account, password and two-factor authentication walks through both.
Every owner sees the Passkeys section on this page. Only an owner with two-step sign-in enabled can add a passkey; otherwise, the section explains how to set it up first. Passkeys may not work inside the ONYX1 iPhone or Android apps; use an authenticator or backup code there. An authenticator or backup code works everywhere, and a passkey does not replace two-step sign-in. See Owner passkeys.
Team policy
Require two-factor for everyone in your team is off until you turn it on. Once it's on, anyone in your workspace who hasn't set up two-factor authentication is sent to set it up before they can open any page, and that includes you. Set up your own first.
Job policy
Require a customer sign-off before a job can be marked ready to invoice is off until you turn it on. With it on, a job can't move to Ready to invoice until a customer sign-off is captured on the job. ONYX1 shows Capture the customer sign-off below before marking this job ready to invoice.
You can still exempt (or require) sign-off on a single job: on the job page, choose Required for this job or Not required for this job instead of Company default.
Accepted quote before scheduling
Jobs can't be scheduled until the client accepts the quote is under Job policy. It starts off for a new business.
When it's on, a job in New needs a linked quote that the client has accepted before it can be scheduled or started. A job with no quote is blocked too. The rule applies only while a job is in New, so work already under way isn't affected, and moving an accepted job to other dates isn't checked again. Office and training jobs are exempt, and recurring jobs made from an existing job are exempt.
This switch is separate from Require the pre-work safety pack on new jobs: you can turn on either one, or both. When this switch was added, each existing business's switch was set to match its safety pack setting, so nothing changed for them.
Pre-work safety pack
This group has three rules. All three are off until you turn them on.
- Require the pre-work safety pack on new jobs. A new field or subcontractor job can't be saved until its SSSP and rescue plan are uploaded and the WorkSafe notification question is answered. Jobs already under way aren't affected, and recurring jobs made from an existing job are exempt. Whether a job needs an accepted quote before it is scheduled is a separate switch; see Accepted quote before scheduling.
- Owner approves safety documents before a job is scheduled. A job can't be scheduled, reach its crew, or show its SSSP and Rescue Plan on the client portal until an owner approves them or marks that none are needed. While it's off, the owner sees how many jobs switching it on would send to Awaiting approval. An admin sees the switch but can't change it, with Only an owner can change this. Job safety documents and owner approval explains what happens to existing jobs.
- Flag photos that carry no camera information. A photo whose file can't be tied to a camera gets a badge and goes into Approvals → Photos for someone to look at. Screenshots, photos forwarded through a messaging app and photos cropped in the phone gallery all lose that information, so most flagged photos are honest work. With the rule off, a photo carrying a real AI-generation marker is still refused when it's uploaded.
Client portal
Share site photos by default
Share site photos with customers by default is off until you turn it on. With it on, every new job shares its site photos and captions with customer logins that can see the job in their client portal. Form and report photos, receipts and signatures are never shown. A photo is marked unverified on upload only while Flag photos that carry no camera information is on, and a photo marked unverified is never shown to customers.
While the setting is off, ONYX1 shows how many existing jobs are not archived, are not already shared and have no recorded individual switch-off. A switch-off you make on a job's Photos card now is recorded, so later company-wide applies leave that job off. Jobs switched off before this setting was added have no recorded choice, so they may be included the first time you turn it on.
- Turn on Share site photos with customers by default and select Save.
- ONYX1 asks Share site photos with customers? and states how many eligible existing jobs it plans to switch on. Archived jobs and jobs with a recorded individual switch-off are not changed.
- Select the confirmation button with that job count, or Turn on when there are none. Select Cancel to close the confirmation without saving.
ONYX1 confirms with Saved. and, when it shared existing jobs, reports how many it changed. Turning the setting off changes no existing job. Sharing can still be turned off, or on, for one job: see Work on a job.
Time and clock-in
Record where staff clock in and flag off-site clock-ins is on unless you turn it off. It uses the phone's location to note when someone clocks in away from the job's site. It never blocks a clock-in; it only flags it. Turn it off to stop ONYX1 capturing location at clock-in.
Show crew the time left is off until you turn it on. With it on, every job card shows how much of the job's quoted hours are left to anyone who can see the job, in any role, whether or not they are clocked in. Anyone clocked in on a job also sees a live countdown, and the time left after their shift when they clock out. The figure counts everyone's time on the job, including time not yet approved, and turns amber in the last quarter and red once the crew goes past the quoted hours. A job with no quoted hours shows no figure on a job card. The live countdown shows the crew's total time on that job instead. Crew see hours only, never rates, costs or the quote amount, and nobody is sent a notification. With it on, anyone who can see a job, contractors included, can work out the crew's total time on it, and anyone clocked in on a job also sees how many people are clocked in on it. The figure never shows names or how long each person worked. Clock in/out shows what crew see.
Show job progress
Show job progress to customers is on unless you turn it off. With it on, a customer who can see a job in the client portal also sees the job's progress figure as a percentage. A job marked done shows 100%, even if an earlier phase or progress note was lower. The portal shows Updated with a date when one is available; it omits that line when a done job has no completion or invoice date. Work on a job explains how the figure and date are worked out. Customers never see the text of progress updates, phase names or who posted an update. Turn it off to hide the percentage on every job.
